Savant HRX-4KVLC100, Deployment Manual

Page: 17 / 27

Savant 4K HDR HDBaseT Matrix Switcher Deployment Guide Copyright © 2020 Savant Systems, LLC
009-1893-01 | 200102 17 of 27
Input & Output
VIDEO SWITCH
INPUT/OUTPUTS
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
None
Input 8
Input 7
Output 1
STATUS
Output 2
STATUS
Output 3
STATUS
Output 4
STATUS
Output 5
STATUS
Output 6
STATUS
Output 7
STATUS
Output 8
STATUS
All
A B C D E A
Input List List of all the available inputs.
B
Output List List of all the available outputs.
C Status Button
Brings up the status information for the selected
output. See the Output Status section below for
more information.
D
Active/Activate
Connection
Indicates an active connection; also can be used to
make an active connection by clicking the check box
for the Input/Output combination.
NOTE
: The None row at the bottom can be used to
break all active connections to a given output.
E
Connect All Connects all outputs to the selected input row.
Output Status
Output 1 Status
HDBaseT Mode
Cable Length
Display Name
Display Connected
Display Powered On
Local Firmware
Remote Firmware
Overall Link Quality
Link Test
HDMI Mode
Display Name
Display Connected
Display Powered On
HDBaseT
<72.18 ft (22m)
LG 65UJ6540
Yes
Yes
1.30.72.110
2.30.72.100
-23dB -21dB -21dB -21dB
Disconnected
No
No
Update
Update
Start
HDBaseT Mode
: Shows whether or not an HDBaseT receiver is connected and being
used.
Cable Length
: Estimated cable length in feet and meters between the matrix and
HDBaseT receiver.
Display Name : Displays the name from the display connected to the output receiver.
Display Connected
: Shows whether or not the display is currently connected to the
receiver. (Yes or No)
Display Powered On
: Shows whether or not the display is currently powered on. (Yes
or No)
Local Firmware
: Displays the current HDBaseT firmware for the matrix, and a button
to update the firmware when available.
Remote Firmware
: Displays the current HDBaseT firmware for the connected
receiver, and a button to update the firmware when available.
Over Link Quality : Displays the current link quality for the 4 HDBaseT channels.
Link Test : Runs a test of the HDBaseT link and display status of the results.
HDMI Mode
: Shows whether or not an HDBaseT receiver is connected and being
used.
Display Name : Displays the name of the display connected to the output receiver.
Display Connected
: Shows whether or not the display is currently connected to the
HDMI ouput.
Display Powered On : Shows whether or not the display is currently powered on.