®
ACCESSORIES & BACKDROP INSTRUCTIONS ON REVERSE
RINGLIGHT BEAUTY VIDEO KIT
SETUP & USAGE
1.
Place the folded stand vertically with the threaded stud at the top.
2.
Twist the bottom lock counterclockwise to loosen.
3.
Pull the three legs apart until the feet rotate down towards the floor, and tighten the lock once the legs are at the desired height.
4.
To extend each upright section, loosen the designated lock, pull the pole up to the desired height, and tighten the lock to secure it in place.
1.
With the stand assembled, place the ringlight adapter on the threaded stud of the stand and tighten knob to secure the ringlight on the stand.
• If the adapter is not sliding over the pin, make sure the wheel on the adapter has been loosened to allow room for the pin.
2.
Plug the power adapter into the light and into an outlet. Turn on the light by twisting the power knob near the bottom of the ringlight clockwise.
• Continue to twist to increase the brightness. To decrease the brightness or to turn off the ringlight, twist the knob counterclockwise.
3.
To adjust the angle of the ringlight, loosen upper knob. Adjust the ringlight to the desired angle, and twist the wheel clockwise to secure it.
SET UP LIGHT STAND
SET UP LIGHT RINGLIGHT
1.
1.
2.
3.
3.
4.
2.
The Savage Ringlight Beauty Kit is the perfect kit for vloggers, photographers and
beauticians! The ringlight presents a soft and even light with a flattering circular
catchlight to showcase hair and makeup flawlessly. On both the top and bottom of
the inner ring is a shoe mount, which the user can attach multiple accessories including
a camera, cell phone and mirror to. Produce seamless makeup applications while filming
beauty tutorials by mounting the mirror directly under your camera inside the ringlight,
allowing your perspective to remain towards the camera at all times.
Cover a distracting background when photographing or filming by hanging the
wrinkle-resistant fabric backdrop up on any wall with the included adhesive hooks.
®
