Service
2 - 3
7000928003 R4
Sauter Components
Service
To gain access to the service level, you have to enter a password (code). It is 6-7-8-9, and it
cannot be changed.
Access to the service level can be prevented by sealing the mode switch.
In the service level, the controller is matched to the task in hand by making these entries,
amongst others:
configure and (if necessary) adjust the measured-value inputs
set the control actions and modes of action
configure the control outputs
In the parameterising procedure described below, the grey fields contain the values that have
been entered at the factory (default values).
They should be considered as examples and apply for control model 0.
All entries and changes should be performed with great care. If the controller fails to
work properly, the cause is often incorrect configuration, e.g. the wrong mode of action
or the wrong type of transmitter.
Summary of Contents for RDT 300 F001
