2 - 36
Description of parameters
7000928003 R4
Sauter Components
.FP
Start of shift
Access:
Manual
Determines the shift's starting point on the command module. See also F1 and
WS.
HL.
Hysteresis of limit
Access:
Service level
Enter the hysteresis (switching difference) for the limit value.
I
ni
Initialisation
Access:
Service level
Resets the controller's EEPROM (parameter memory) to the default values. Default values are shown with a grey background
in the operating instructions.
L.
Limit
Access:
Service level
Specifies the source for the limit value module. The "Off" setting completely deactivates the limit value module.
L.
Switching point for
Limit
Access:
Manual, automatic
Ld.
Target of limit
Access:
Service level
Specifies the target relay for the alarm output. If set to "Off", no relay is assigned.
Summary of Contents for RDT 300 F001
