Sauter Components ASM 124 F120, Quick Start Manual

Page: 1 / 4

51.025/1
ASM 124: Actuators
How energy efficiency is improved
Torque related cut-off for efficient energy use.
Areas of application
For controllers with a switching output (2-point or 3-point control). For actuation of air, shut-off and
restrictor dampers and louvres.
Features
•
18 Nm torque and holding torque
•
230 V, 50/60 Hz or 24 V, 50/60 Hz
•
120 sec. running time for 90°
•
Protection class IP54 4)
•
Operating noise < 30 db(A)
•
Self-centring axle adaptor
•
Gearbox that can be disengaged for positioning the damper and manual adjustment
•
Synchronous motor with control and electronic cut-off
Y07551
M •
Maintenance-free
Technical description
•
Two-part housing made of self-extinguishing plastic, lower section black and upper section
yellow
•
Suitable for all installation positions
•
Connecting cable 1.2 m long, 3x 0.75 mm²
•
Direction of rotation can be changed by reversing connections
Type
3)
Torque
Nm
Holding
torque
Nm
Running time
1)
for 90°
s
Power Weight
kg
ASM 124 F120 18 18 120 230 V~ 1,2
ASM 124 F122 18 18 120 24 V~ 1,2
Power supply 230 V~
±
15%, 50...60 Hz Degree of protection
4)
IP 54 as per EN 60529
24 V~
±
20%, 50...60 Hz Protection class 24 V III as per IEC 60730
230 V II as per IEC 60730
Power consumption
ASM 124 F120 2,9 W 5,6 VA Noise while running < 30 dB(A)
ASM 124 F122 2,3 W 2,4 VA Response time 200 ms
Angle of rotation 90°
1)
Wiring diagram
Damper spindle Ø 10...20 mm 2-point 24 V A10210
10...16 mm 2-point 230 V A10402
Damper spindle (hardness) max. 300 HV 3-Punkt A09713
Permissible ambient temp. –20...55 °C Dimension drawing M05671
Permissible ambient humidity < 85 %rh Fitting instructions MV 505792
without condensation Declaration on materials MD 51.025
Accessories
0361977 001 Assembly kit for MH32 / MH42 control valve; MV 505477
0370059 000 * Clamp-on lever for shafts of d=8-18 mm
0370990 001 *
Auxiliary change-over contacts
2)
, single, MV 505446
0370990 002 *
Auxiliary change-over contacts
2)
, double, MV 505446
0370992 001 * Potentiometer, 2000
Ω,
1 W, MV 505446
0370992 002 * Potentiometer, 130
Ω
, 1 W, MV 505446
0372200 001 Fixing bracket; MV 505676
0372201 001 Spindle extension with coupling; MV 505676
0372202 001 Lever and tape; MV 505676
0372203 001 Connecting piece for contact unit; 0370990; MV 505676
0372204 001 Spindle for clamp-on lever 0370059; MV 505676
*)
Dimension drawing or wiring diagram are available under the same number
1)
Maximum angle of rotation: 95° (without stops)
2)
Fully variable from 0...90°; max. loading 5 (2) A, 24...230V
3)
Version with halogen-free cable available on request
4)
See fitting instructions
Sauter Components
7151025003 04