Pa
ge
1
of
5
Saunacore "Country Living" Barrel Sauna
1.
Placing 3 bases on the ground in line, be sure the bases are parallel to each other. See Figure-1.
2.
Put stave marked “S” on the center of the bases, with end have a groove on its inside face. See Figure-2.
Figure-1 Figure-2
3.
Placing stave marked “A-1” in the center of the bases, close to stave “S“ and match well. See Figure-3.
4.
Then placing stave marked “A-2”~”A-3”, “B-1”~”B-3” on the bases in turn and close to each other.
Make sure that all the staves are square to bases and the groove is lined up on all pieces. See Figure-4.
Figure-3 Figure-4
5.
Fix these 7 staves on bases with self-trapping screws from inside. See Figure-5.
6.
Find panel “R-0” and raise it up, put one end into groove and make sure perfect vertical.
See Figure-6.
Figure-5 Figure-6
