110
Measurements
Leak detector
13.7
Measurements
→
Search for leak
13.7.1
Connection of probe for gas leak
-
Connect the probe connection to the IN input of the instrument.
13.7.2
Performing the test
At the end of the autozero cycle, perform a measurement autozero and proceed with the test. Result:
The instrument has detected the presence of gas:
Audible alarm: the beep frequency increases with the increase in the concentration of the gas
detected. Visual alarm: from yellow to red with the increase in concentration of the gas detected.
The instrument has not detected the presence of gas:
Audible alarm: 1 beep/second
Visual alarm: green colour.
IN
Measurements
Leak detector
O
15/01/14
10:00
KEY
FUNCTION
Enables the displayed interactive operations.
Return to the previous page.
CONTEXT KEY
FUNCTION
Perform a measurement reset.
