Gas Range Manual
Page 19
Revision: 21 Oct 2011
To clean the burners, remove the burner cap and clean with a suitable
detergent and warm water. If the burner ports are blocked, clean these with a
stiff brush. Place the burner cap back on the burner, ignite and check that the
flame is even and comes from all ports (this dries the burner cap).
If any ports remain clogged, remove the burner cap and complete burner and
clean thoroughly with a suitable detergent and hot water. Dry thoroughly,
ensure the air shutter is fully open, reinstall (ensure the injector is located in
the burner venturi), ignite and check the flame pattern.
Note:
The burner flame should be uniformly blue. If yellow flames are present,
this may indicate that grease and dirt are present in the burner throat. Remove
and clean the burner per the above.
TRIVETS
The trivets should be removed from the appliance before cleaning.
To clean the trivets, wash with warm water and a suitable detergent using a
soft cloth and then dry.
For heavily soiled trivets, use a suitable oven cleaner and non-abrasive pad or
brush.
