manualshive.com logo in svg

Saturn 2008 Sky, Owner'S Manual

The Saturn 2008 Sky Getting To Know Manual is a comprehensive guide designed to acquaint you with the features and functions of this iconic sports car. Download this manual for free from our website and unlock a wealth of valuable information to enhance your driving experience.

Share
Download
background image

When the ESC system is turned off, the TRACTION
OFF and ESC OFF messages appear, and the
ESC/TCS light comes on to warn the driver that both
traction control and ESC are disabled.

It is recommended to leave the system on for normal
driving conditions, but it may be necessary to turn
the system off if your vehicle is stuck in sand, mud,
ice or snow and you want to “rock” your vehicle
to attempt to free it. It may also be necessary to turn off
the system when driving in extreme off-road conditions
where high wheel spin is required. See If Your Vehicle is
Stuck in Sand, Mud, Ice, or Snow on page 4-22. Also,
see “Competitive Driving Mode” later in this section.

ESC may also turn off automatically if it determines that
a problem exists with the system. The ESC OFF and
SERVICE ESC messages and the ESC/TCS light comes
on to warn the driver that ESC is disabled and requires
service. If the problem does not clear after restarting
the vehicle, see your dealer/retailer for service.
See DIC Warnings and Messages on page 3-41 for
more information.

Adding non-dealer/non-retailer accessories can affect
your vehicle’s performance. See Accessories and
Modifications on page 5-3 for more information.

Competitive Driving Mode

The driver can select this optional handling mode by
pressing the ESC/TCS button on the console two times
within a five second time period. COMPETITIVE
MODE displays in the DIC. See DIC Warnings and
Messages on page 3-41 for more information.
Competitive Driving Mode allows the driver to have full
control of the rear wheels while the ESC system
helps maintain directional control of the vehicle by
selective brake application. The ESC/TCS light will be
on and the traction control system will not be operating.
Adjust your driving accordingly. This electronic stability
control mode is recommended only for use during closed
track events and competitive driving venues.

When the ESC/TCS button is pressed again, or the
vehicle is restarted, the ESC and TCS turn back on.

Notice: When traction control is turned off, or
Competitive Driving Mode is active, it is possible to
lose traction. If you attempt to shift with the rear
wheels spinning with a loss of traction, it is possible
to cause damage to the transmission. Do not
attempt to shift when the rear wheels do not have
traction. Damage caused by misuse of the vehicle is
not covered. See your warranty book for additional
information.

4-10

Summary of Contents for 2008 Sky























































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Sky

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
Honda 2010 Civic Sedan Owner'S Manual preview
2010 Civic Sedan
Brand: Honda Pages: 390
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Brand: ECS Electronics Pages: 42
ACV 381190-37-1 Installation Manual preview
381190-37-1
Brand: ACV Pages: 2
Nav TV MOST-HUR31 Manual preview
MOST-HUR31
Brand: Nav TV Pages: 8
Haltech NEXUS R3 Quick Start Manual preview
NEXUS R3
Brand: Haltech Pages: 13
Rosco STSK4730 Installation & User Manual preview
STSK4730
Brand: Rosco Pages: 12
Mercedes-Benz G 55 AMG Operator'S Manual preview
G 55 AMG
Brand: Mercedes-Benz Pages: 284
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2

Brands by name

Popular brands

Load more brands