Section 7: Interface Specifications
TH2 Series Operator Manual
Page 7-3
7.3 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN
7.3.1 Basic Specifications of LAN
LAN interface is available with Type 2 boards.
Interface connector
Cable type: For 10BASE-T and 100BASE-TX
Cable length: 100m or less
Link/Status LED
Status LED lights up when establishing the LINK with Ethernet equipment. The LINK is
established by Auto Negotiation.
LED
Color
Conditions
LINK/ Active
Yellow
LED on when establishing the link.
LED blink when Data Transmit or Receive.
SPEED
Green
Lights off when recognizing the destination
10BASE-T
Lights up when recognizing the destination
100BASE-TX
Maintenance function
[Printing LAN configuration information]
LAN configuration information will be printed on the second and third sheet of factory test
print.
[Initializing LAN configuration information]
LAN configuration information will be initialized through Service Mode or Advanced setup.
For more details, refer to the authorised SATO service personnel.
Communication
configuration
The following settings can be configured via the Printer network setup.
Item
Setting range
IP address
0.0.0.0 ~ 255.255.255.255
Gateway address
0.0.0.0 ~ 255.255.255.255
Netmask
0.0.0.0 ~ 255.255.255.255
IP address setup
Static, DHCP, RARP
Name server
0.0.0.0 ~ 255.255.255.255
2-port connection by Port 1024 and Port 1025 or 1 port connection by Port 9100.
