SATO SG112 ex, Programming Reference Manual

Page: 48 / 516

47
[ESC+&] Store Form Overlay
ESC & Parameter Hexadecimal code
<1B>
16
<26>
16
(aab...b)
Initial value None
When the power is OFF The set command is not maintained.
Valid range within items The set command is valid until the next specification is
made.
Valid range and term of
command
Valid range between items; The set command is valid until the next specification is
made.
[Function]
Specifying the registration of form overlay.
[Format]
<&>(aab...b)
- Parameter
a [Registration key] = Valid range : 01 to 99 (omissible)
b [Comment] = Max. 16 bytes (omissible)
[Coding Example]
<A>
<V>100<H>50<FW>1010V800H750
<V>100<H>50<FW>0505V760H710
<V>150<H>100<XB>0MODEL
<&>01DATA1
<Z>
[Supplementary Explanation]
- This command saves fixed print contents to the printer and then, Recall Form Overlay </>
combines the contents with drawing of general data to print out.
- Specify this command at the end of data string that is to be stored. Drawing valid range in form
overlay registration is same as printing area.
- This command can register only one format. Use any code from 01 to 99 as a registration key.
- To change contents, specify Clear Form Overlay (<*>&), and then register new storage data.
- Invoke registered contents by Recall Form Overlay </>.
- When specifying Media Size <A1>, it will be extracted in the specified area.