SATO SG112 ex Programming Reference Manual Download Page 403

Page: 403 / 516

402

[ESC+IY] Exclusive Display Start-End

ESC

Parameter

Hexadecimal code

<1B>

<49>

<59>

Initial value

None

When the power is OFF

The set parameter is not maintained.

Valid range within items

The set parameter becomes invalid.

Valid range and term of

command

Valid range between items

The set parameter becomes invalid.

[Function]

The message area (upper and lower column) that is specified by Displayed Messages <IM> is

exclusively used and messages from the printer system will not be displayed temporarily.

[Format]

<IY>a

Parameter

a [Exclusive display start-end]

1 : Start exclusive display

0 : End exclusive display

[Coding Example 1]

Start exclusive display
<A>

<IY>1

<Z>

[Coding Example 2]

End exclusive display
<A>

<IY>0

<Z>

[Supplementary Explanation]

Do not specify this command together with other SBPL commands in the same item.

Send this command only when this product is online and operation stop (waiting for receive)

status.

The data which this command is included are not received while this product is operating. This

is true for both start/end exclusive display.

The icon display area is not possible to use exclusively.

This command is invalid when the printer is offline or error state.

Error messages are not displayed while the display is used exclusively. Confirm with icons only.

The display will not be used exclusively when message display is not specified by Displayed

Messages <IM>.

Summary of Contents for SG112 ex





































































































































































































































































































































































































































































































































Search results

Summary of Contents for SG112 ex

Reviews:

Brands by name

Popular brands

SATO SG112 ex, Programming Reference Manual

Search results

Summary of Contents for SG112 ex

Reviews:

Brands by name

Popular brands