SATO SG112 ex, Programming Reference Manual

Page: 189 / 516

188
[ESC+BC] CODE93 Barcode
ESC BC Parameter Hexadecimal code
<1B>
16
<42>
16
<43>
16
aabbbccn...n
Initial value None
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifying CODE93 barcode.
[Format]
<BC>aabbbccn...n
- Parameter
a [Narrow bar width] = Valid range : 01 to 12 dots
b [Height of Barcode] = Valid Range : 001 to 999 dots
c [Digit number of data] = Valid Range : 01 to 99
n [Print data] = Barcode data (Refer to the CODE93 – Code Table.)
[Coding Example]
Narrow bar width: 02, Barcode height: 120, Number of digit: 12, Print data: ABCD123456xy
<A>
<V>100<H>200
<BC>0212012ABCD123456xy
<Q>2
<Z>
[Supplementary Explanation]
- Check Digit is an auto-generation.
- Start code and stop code will be automatically added.
- Maximum entry digit number of data is 99.
- [Digit number of data] and number of input data have to be equal.
- Command error will occur when number of input data and [Digit number of data] are not
matched.