manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 58 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 58

Settings Mode Menus

58

Settings Mode Menus

There are the following main menus in the Settings mode and each menu contains many layers of

submenus. Frequently used settings are also listed in the [Shortcut] menu so that you can directly

access them.

Menu

Description

Shortcut Menu

Directly access the settings registered in advance as well as adjusting

registered setting items during printing.

Printing Menu

Access the settings related to printing.

Interface Menu

Access the settings related to the interfaces.

Applications Menu

Access the settings related to the printer command.

System Menu

Access the settings related to the display language, buzzer volume

etc.

Tools Menu

Access the test print, initialization and other settings.

Information Menu

Displays the information and guidance videos for the product.

 

•

The 

 icon appears between the [Information] menu and [Shortcut] menu when

the [System] > [Regional] > [Display Language Icon] menu is enabled. You can easily

access the [Language] menu.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments