manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 530 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 530

Error Message Indication and Operating Procedure When the SOS (SATO Online Services) Is Enabled (SOS users only)

530

Error Message Indication and Operating Procedure When the

SOS (SATO Online Services) Is Enabled (SOS users only)

The SOS (SATO Online Services) icon appears in the error message when SOS is enabled.
If you select the SOS icon, a QR code containing the error information and the contact telephone

number appears.
 

•

Press the 

 button.

•

If the icon of the guidance videos also appears, select the SOS icon using the 

/

button, and then press the 

 button.

A screen with QR code, phone number, serial number, and error number appears after selecting the
SOS icon and pressing the 

 button.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments