manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 223 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 223

223

[NFC]

Sets the NFC connection.
The setting item is as follows:

[I/F Enable]

Enables or disables the NFC interface.
The options are as follows:
Enabled

Enables the NFC interface.

Disabled

Disables the NFC interface.

 

[Ignore CR/LF]

Set whether to ignore the CR/LF code (0x0D / 0x0A) in the received data.
The options are as follows:
Enabled

Ignore the CR/LF code.

Disabled

Do not ignore the CR/LF code.

 

[Ignore CAN/DLE]

Set whether to ignore the CAN/DLE code (0x18 / 0x10) in the received data.
The options are as follows:
Enabled

Ignore the CAN/DLE code.

Disabled

Do not ignore the CAN/DLE code.

 

[External I/O]

Use the external (EXT) terminal as an interface between the external device and the product.
The setting items are as follows:

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments