SATO S84NX Operator'S Manual Download Page 16

Page: 16 / 588

Features of the Product

What You Can Do with This Product

Features of the Product

The main features of the product are as follows:

•

Rugged design stands up to rigorous operation in harsh environments

•

Stable high-speed printing achieved by combining maximum 16 ips print speed with adjustable

backfeed speed

•

Equipped with highly legible TFT color 3.5-inch display and LEDs. Quickly identify product status

and errors

•

Print head and rollers, like platen roller, are easy to replace

•

Help videos explain easy operations including loading paper and ribbons as well as replacing

consumables

•

Supports 31 languages for display and 47 languages for printing scalable fonts

•

SBPL (SATO Barcode Printer Language) supported as well as many other printer commands like

SZPL

•

IPv6, SNMP, NTP, and other protocols supported in various communication interfaces

•

Remotely verify product information and change settings via network connection

•

Use All-In-One Tool to help control and set up the product

•

AEP (Application Enabled Printing) equipped. Simple Standalone mode is standard feature for

outputting labels without a computer

•

Equipped with One Display mode to operate the product from the applicator's screen

•

SOS (SATO Online Services) equipped to monitor product remotely for preventive maintenance

and troubleshooting

Summary of Contents for S84NX












































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S84NX

Reviews:

SATO S84NX, Operator'S Manual, Page: 16 / 588

Search results

Summary of Contents for S84NX

Reviews: