manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 103 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 103

103

5. Select the interface using the 

/

 buttons.

 

[Network]

Sets the LAN connection and wireless LAN connection.

[RS-232C]

Sets the RS-232C connection.

[USB]

Sets the USB connection.

[NFC]

Sets the NFC connection.

[Ignore CR/LF]

Sets to ignore CR/LF codes.

[Ignore CAN/DLE]

Sets to ignore CAN/DLE codes.

[External I/O]

Sets the external signal (EXT).

[RFID] (S84NX only)

Sets the RFID.
Appears only for the RFID model.

 

6. Press the 

 button.

The settings items of the selected interface appear.

 
Change the settings according to the communication conditions of the connected network and

computer.

Configuring the Interface Settings Using the All-In-One Tool

When you use the All-In-One Tool, you can easily set and manage the product.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments