Section 3: Operation and Configuration
CW408 Operator Manual
Page 3-35
3.14 TEST PRINT MODE (Cont’d)
3.14.3 Configuration Test Print (User Test Print)
Printed Item Name
Description
Print Speed
2 to 6(inch/s)
Print Darkness
1 (Lightest) ~ 10 (Darkest) A
Print Offset V
±xxxx(dot)
Print Offset H
±xxxx(dot)
Label Size
(P)xxxx X (W) xxx (dot)
Operation Mode
Continuous mode: Continuous
Cutter mode: Cutter
Dispenser mode: Dispenser
Tear-off mode: Tear off
Backfeed Action
After: Action 1
Before: Action 2
No backfeed motion: None
Print Method
Direct thermal printing: Direct thermal
Sensor Type
I-mark: Reflective sensor
Gap: Transmissive sensor
Sensor disabled: None
OLED Sleep Time
00 ~15 (min)
OLED Brightness
01 (dark) ~ 03 (bright)
OLED Language
ENGLISH/ CHINESE
Zero Slash
Zero slash enabled: Enable
Zero slash disabled: Disable
Codepage
858
Kanji Font
GB18030
Character Pitch
Printing by proportional pitch: Proportional
Printing by fixed pitch: Fixed
Head Check
Disabled: None
Enabled:
Actual print area checking: Normal
Barcode print area checking: Barcode
Head Check Mode
1Item/ Page(xxxxxx)/ Start-End/ None
Auto Online
Enable/ Disable
Initial Feed
Enable/ Disable
Online Feed
Enable/ Disable
Priority Setting
Command/ Internal
Command Error
Enable/ Disable
Paper End Search
ROLL/ FANFOLD
Buzzer
Enable/ Disable
Option waiting time
1000 (ms)
Ignore CR/LF
Enable/ Disable
Ignore CAN/DLE
Enable/ Disable
Protocol Code
Standard/ Non-Standard
Printing out the protocol code set for the printer.
STX:xxH, ETX:xxH, ESC:xxH, ENQ:xxH,
CAN:xxH, NULL:xxH, OFFLINE:xxH, EURO:xxH
Printed contents of the interfaces will be the same as that of factory test print.
Preliminary