Section 3: Operation and Configuration
CW408 Operator Manual
Page 3-13
3.7 PRINT SETTINGS MODE
The following settings are available in the Print settings mode.
1.
In BASIC SETTINGS menu, press the
LINE
button to display PRINT SETTINGS on the screen. Press the
FEED
button to confirm the selection.
2.
The value set for PITCH in the Adjustment mode is first displayed. Press the
LINE
button to display the
next items as shown above.
3.
Press the
FEED
button to switch to the next setting options as shown above. To return to the previous set-
ting option, press the
LINE
and
FEED
buttons simultaneously. To return to the BASIC SETTINGS screen,
press and hold the
LINE
and
FEED
buttons simultaneously for more than three seconds.
4.
When the desired setting option is displayed, press the
LINE
button to set the value or select an item.
Then press the
FEED
button to shift the cursor to the next digit or to save the setting and move to the next
screen.
Do a test print after completing the adjustments to make sure that the settings are correct. Refer to
for details.
LINE
button
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
BASIC SETTINGS
PRINT SETTINGS
SELECT
SKIP
PRINT SETTINGS
ADJUST SETTINGS
DARKNESS 50
PRINT SETTINGS
ADJUST SETTINGS
PITCH +0.00
PRINT SETTINGS
ADJUST SETTINGS
OFFSET +0.00
LINE
button
LINE
button
FEED
button
LINE + FEED
button
PRINT SETTINGS
PRINT SPEED
IPS
4
FEED
button
LINE + FEED
button
PRINT SETTINGS
PRINT DARKNESS
05
FEED
button
LINE + FEED
button
FEED
button
LINE + FEED
button
PRINT SETTINGS
PRINT OFFSET
0000 H:+000
+
V:
LINE + FEED button
for more than 3 secs
FEED
button
* Press the LINE button to set the value or select an
item.
* Press the FEED button to shift the cursor to the next
digit or to save the setting and move to the next
screen.
* Press and hold the LINE and FEED buttons
simultaneously for more than three seconds to
revert to the BASIC SETTINGS menu.
Preliminary