Section 3: Operation and Configuration
CW408 Operator Manual
Page 3-9
3.4 ADJUSTMENT MODE
The printer has a quick access to the Adjustment mode for setting the print position, stop position, the print
darkness, buzzer setting and display brightness. These adjustments are in conjunction with the configuration
adjustments done in the Service mode menu and the Basic settings mode menu.
1.
When the printer is in OFFLINE mode or PAUSE mode, press and hold the
LINE
button for more than
three seconds to set the printer to Adjustment mode. The PITCH POSITION screen is displayed first.
2.
Press the
LINE
button to set the desired value and press
FEED
button to shift the cursor to the next digit.
Press the
FEED
button again to save the setting and move to the next adjustment screen.
3.
After adjustment, the display returns to OFFLINE or PAUSE mode.
Press the
LINE
and
FEED
buttons simultaneously to shift the cursor back to previous unit or previous
adjustment screen.
Press and hold the
LINE
and
FEED
buttons simultaneously for more than three seconds to return to
OFFLINE or PAUSE mode.
OFFLINE
000000
PAUSE
000005
With print data
No print data
LINE button for
more than 3 secs
ADJUSTMENT MODE
PITCH POSITION
0.00 mm
+
ADJUSTMENT MODE
CUT POSITION
0.00 mm
+
ADJUSTMENT MODE
OFFSET POSITION
0.00 mm
+
FEED
button
*
1
Press LINE button to set the value.
Press FEED button to move cursor.
LINE + FEED
button
LINE + FEED
button
FEED
button
LINE + FEED
button
ADJUSTMENT MODE
PRINT DARKNESS
5
0
ADJUSTMENT MODE
BUZZER
DISABLE
ENABLE
FEED
button
LINE + FEED
button
FEED
button
LINE + FEED
button
ADJUSTMENT MODE
BRIGHTNESS
2
FEED
button
Press LINE button
to select the item.
Displayed only when
cutter option is installed.
Displayed only when
Tear-off mode or
dispenser option is
installed.
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
LINE +
FEED button
for more
than 3 secs
*
1
*
1
*
1
*
1
Preliminary