Section 2: Installation
CW408 Operator Manual
Page 2-3
2.2 CONNECTIONS
This section explains the power cord and interface cable connection procedures.
2.2.1 Standard Interface Connection
CW408 printer has two types of interfaces to perform data communication with the host.
1) USB interface
2) LAN interface
Connect
only one type
of interface cable from the printer to the host computer. Use the cable that is
compatible with the standard of the interface board as stated in
Section 7: Interface Specifications
sure the cable is correctly oriented.
2.2.2 To Configure the Connected Interface
After connection, you need to set the configuration of the connected interface in the I/F SETTINGS menu of
the printer. Refer to
Section 3.10 Interface Setting Mode
for details on setting Interface mode.
When connecting to LAN interface, you can use
SATO All-In-One
Application to set up the network. Contact
your SATO reseller or technical support center for more details. Or you can download the software directly
from our official website, www.satoworldwide.com.
Caution
Do not connect or disconnect the interface cables (or use a switch box) with power of the host or
printer is set to on. This can cause damage to the interface circuitry in the printer/ host. The
warranty does not cover this damage.
USB
LAN
USB
LAN
Host
Preliminary