Saten 1U User Manual Download Page 5

Page: 5 / 60

Network Video Recorder

User Manual

Network Video Recorder

The following content is about use of the product, the prevention of danger as well as preventing property

from the loss. Please be sure to comply.

1. Please placed NVRs within the permissible range of temperature and humidity.

2. Do not install the NVRs in a damp, dust or soot place.

3. Place the product horizontally and pay attention to preventing it from falling.

4. Installed in a well-ventilated place and do not block the vent.

5. Do not place containers filled with on the device.

6. Do not place other equipments above the product.

7. Do not disassemble this product.

8. Please select the hard disk recommended by manufacturers and suitable for the requirements of the

NVR.

1. Precautions

Please prevail in kind. The manual is for reference only.

This manual may contain inaccurate data or printing error.

The products described in this manual may be updated at any time.

Screenshots of the manual is not in a machine and only for display.

If in doubt, obtaining a copy of the latest procedure or the additional document, please contact with the com-

pany's after-sales department.

2. Declaration

3.1. Product Overview:

This product is designed specifically for the field of video surveillance and adopts H.264 video compression,

hard disk recording, TCP/IP transmission and a Linux based OS in addition to some of the advanced tech-

nology in the information technology industry. This enables a more stable, reliable and high picture quality.

This product complies with standards of GB 20815-2006

《

video security surveillance digital video re-

cording

》

promulgated by the State. At the same time, the product supports the ONVIF protocol (base on

《

ONVIF ™ Core Specification

》

Version 2.2) and is compatible with the network cameras which supports

ONVIF protocol. This product can realize the switching of NVR mode or mixed mode (Mixed mode can both

connect with analog channels and network cameras when the NVR modes only connect with network cam-

eras) ,recording, playback, monitoring, synchronization of audio and video. Besides the products support

advanced control technology and strong network data transmission capacity.

3. Product Introduction

Summary of Contents for 1U





























































Search results

Summary of Contents for 1U

Reviews:

Related manuals for 1U

Brands by name

Popular brands

Saten 1U, User Manual

Search results

Summary of Contents for 1U

Reviews:

Related manuals for 1U

Brands by name

Popular brands