TAG4 CART
ASSEMBLY INSTRUCTIONS
2530 Xenium Lane North, Minneapolis, MN 55441
Telephone: 763-553-1900 Fax: 763-553-1905
800-328-3332 / www.satelliteindustries.com
7/2020
REV A 23488 INSTRUCTIONS TAG4 CART
1
* HDWE- TAG4 CART (
23487
)
5
11368
8
WASHER- 5/16 FLAT STNLS
4
20840
4
NUT- 5/16-18 NYLOC STNLS
3
23489
4
BOLT, 5/16-18 X 2 HXHD STNLS
ITEM
PART# QTY
DESCRIPTION
2
23487
1
HDWE- TAG4 CART *
1
23484
1
CART ASSY- TAG4
ITEM
PART# QTY
DESCRIPTION
1
4
5
3
NUT (4)
WASHER (8)
BOLT (4)
ALUMINUM PLATE
DRILL AT DRILL POINT
EACH END
TIGHTEN BOLTS AND NUTS UNTIL SNUG
ASSEMBLE CART TO SINK
1. Drill (2) holes with ½ inch drill bit at indicated locations in sink base.
2. Place sink on cart and align holes.
3. Insert bolts with washers through holes from below.
4. Tighten nuts and bolt until snug.
Do not over tighten.
TOOLS: - DRILL -
½” DRILL BIT
-
½” WRENCHES (2)
** SEE PAGE 2 IF CART REQUIRES ASSEMLBY **
