RE-1K
•
RE-2K
RADIO REMOTE CONTROLLER
re12k_en 05/18
The RE-1K / RE-2K controller allows you to use keyfobs to control devices connected to relay
outputs.
1. Features
1 [RE-1K] or 2 [RE-2K] control channels.
Support for up to 16 keyfobs.
Transmissions secured by KeeLoq code hopping.
1 [RE-1K] or 2 [RE-2K] relay outputs.
OC type output signaling the activation of the relay output.
LED
indicator.
Tamper switch activated by cover removal.
2. Electronics board
Fig. 1. Electronics board of the RE-2K controller.
bicolor LED indicator:
ON in green – power OK,
ON in red – transmission has been received from keyfob,
flashing red – transmission has been received from keyfob with low battery.
tamper switch.
antenna.
K1 and K2 pins. To be used for setting the operating mode of relay outputs. The digit
stands for the number of the relay output.
Note: The RE-1K controller has no K2 pins.
PROGRAM button. Allows you to enroll keyfobs, define the cut-off time of relay output or
restore the factory default settings.
