SATEL PERFECTA
5
displayed on the keypad with the lowest address. You can press
to restore the
factory default settings. The service mode menu will not be displayed until the factory
settings are restored.
2.3 Service mode indication
The service mode is indicated on the keypads by means of the
LED. The
LED is
steady ON on the keypad on which the service mode menu is displayed, and is flashing on
the other keypads. Additionally, the service mode can be signaled audibly, after the
appropriate option is enabled.
2.4 Navigating through the menu and running functions
To navigate throughout the menu, you can use the arrow keys or number shortcuts. You can
also combine the two methods. The cursor shows the submenu you can enter / function
you can run.
2.4.1 Using the arrow keys
1. Using the
and
keys, find the required submenu.
2. Press
or
to open a submenu (use the
key to go back to the main menu).
3. Repeat the steps 1 and 2 until the required function is found.
4. Press
or
to run the function.
2.4.2 Using the number shortcuts
Submenus and functions are numbered (you can find the numbers in the L
IST OF SERVICE
FUNCTIONS
document).
1. Use the number keys to enter the number (use the
key to erase the last digit).
2. The menu item designated by this number will be displayed (use the
key to go back
to the main menu).
3. Press
or
to open a submenu or run a function.
If the cursor indicates E
ND
SM and you want to quickly run a function, enter its number and
press
or
. For example, to run the expander identification function, press
successively
.
If the cursor indicates an item different from E
ND
SM, entering a digit will add this digit at
the end of the number by which the item displayed in the menu is designated. New digits are
always added at the end of the number displayed (only the E
ND
SM function is not
numbered). For example, if the cursor indicates a menu item with the 31 (31.EOL) number,
pressing
in turn will display the 3132 (3132.Zn.32
EOL) item, not the 32
(32.S
ENSITIVITY
) item. To display the 32 (32.S
ENSITIVITY
) item, you should press
(to
move the cursor down) or
(to erase 1 and add 2).
If you remember the submenu/function number and you want to avoid mistakes, press
before entering the number.
2.5 Data editing
The editing method depends on the type of data. Having completed the editing, press
to save the changes. If you want to exit the function without saving the changes, press
.
