12 MTX-300
SATEL
Status information
Fig. 4. Status information presented in MTX
SOFT
program.
controller serial number and firmware version.
current supply voltage and status of tamper switch.
input status:
green – normal,
red – violation.
siren status:
gray – not added,
green – standby,
light-green – communication in progress,
red – signaling in progress,
yellow – no communication.
Click on the indicator to trigger the selected type of signaling for testing purposes.
number of COM port through which communication takes place, and port status:
gray – disabled,
green / light-green (alternately) – communication in progress.
information on data read / write progress.
status of programmable relay outputs:
blue – off,
orange – on.
status of FTR, FTB and OTMP outputs (information on current output configuration in
brackets):
green – off,
red – on.
Tabs
In the tabs, you can configure the controller, detectors, keyfobs and sirens, as well as use
diagnostic tools.
