4 ARU-100
SATEL
programming related information please refer to the ACU-100 / ACU-250 / ACU-120 /
ACU-270 manual).
Due to the nature of communication, there can be some delays in the transmission of
information between detectors, repeater and controller in the system. In order to
minimize the delays and speed up the communication, you can set the detectors
permanently in the active state, that is, one in which the detectors will report each
alarm immediately. Detectors which are violated occasionally can be set in this
manner, because battery life will not be affected in their case.
Fig. 2. Connecting the power wires.
Hereby, SATEL sp. z o.o., declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at www.satel.eu/ce
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gda
ń
sk • POLAND
tel. 58 320 94 00
www.satel.eu
