SATEL
ACCO-KP2
8
1 very long beep
– access denied (the keypad is blocked by the “Anti-Scanner” function).
Long beep lasting 10 seconds
– alarm.
4.2 Unlocking the door
The door will unlock when you are granted access. When the door is unlocked, you will be
able to open the door. The installer should tell you how much time you have to open the door
after access is granted and how much time you have to close the door. The installer should
also tell you which of the following procedures to use in order to get access.
If alarm memory is signaled in the keypad (the
LED is flashing), the alarm memory
will be cleared as soon as the user with the
“Administrator” right is granted access.
4.2.1 Getting access
Getting access by using the code
1. Enter the code and press
or
.
2. When the
LED will start flashing, open the door.
Getting access by using the proximity card
1. Present the card on the keypad reader.
2. When the
LED will start flashing, open the door.
Getting access by using two identifiers
1. Use the first identifier.
2. When the message will be displayed that the keypad is waiting for the second identifier
–
use the second identifier.
3. When the
LED will start flashing, open the door.
4.2.2 On duty
After you are granted access, when the message “On duty” is displayed (Fig. 2), you can
press
to register the entry / exit as made for official purposes. Ignore the message if your
entry / exit is not connected with your official duties.
Fig. 2. Message on the possibility to register entry / exit as made for official purposes.
4.2.3 Access denied
The door will remain locked if:
the identifier is unknown,
the user cannot get access because:
the keypad only grants access based on the card, but the code has been entered,
the keypad only grants access based on the code, but the card has been used,