Satel abax 2 ADD-200 Manual Download Page 8

ADD-200 

SATEL 

7.  Configure  the  detector  settings  (sensitivity  of  dusk  sensor  [detection  threshold], 

temperature  threshold  parameters  [threshold  type:  high  /  low,  temperature  value  and 
tolerance], etc. 

– see ABAX 2 controller manual). 

8.  Start the test mode (see ABAX 2 controller manual). 
9.  Check whether the dusk sensor works properly. When tested, the entire detector must be 

covered, e.g. by a cardboard box or a thick and dark piece of fabric. 

10. End the test mode. 

 

4  Specifications 

Operating frequency band................................................................... 868.0 MHz 

÷ 868.6 MHz 

Radio communication range (in open area) 

ACU-220 .............................................................................................. up to 2000 m 
ACU-280 .............................................................................................. up to 1600 m 

Battery.................................................................................................................... CR123A 3 V 
Battery life expectancy .......................................................................................... up to 2 years 
Light intensity measurement range .......................................................................... 2 lx...250 lx 
Temperature measurement range ....................................................................... -

30°C...+70°C 

Temperature measurement accuracy ................................................................................ 

±1°C 

Standby current consumption .......................................................................................... 20 

µA 

Maximum current consumption ........................................................................................ 12 mA 
Warm-up period .................................................................................................................... 5 s 
Environmental class according to EN 50130-5 ....................................................................... III 
Operating temperature range ............................................................................... -30

°C...+70°C 

Maximum humidity .......................................................................................................... 93

±

3% 

IP code ................................................................................................................................IP65 
Dimensions ................................................................................................... 58 x 115 x 34 mm 
Weight ................................................................................................................................. 95 g 
 

Summary of Contents for abax 2 ADD-200









Reviews: