Satechi pm130e, Reference Manual

Page: 56 / 76

56
Address Point ID Description Options/Range Units Type R/W Notes
identification (F30, F32, F34, F36),
Bit 8=1 – freeze with reset,
Bit 9=1 – local freeze,
Bit 10=1 – cyclic data transmission,
Bit 11=1 – general interrogation,
Bits 12:15 – interrogation group =
0-15 (0=no group assigned)
+1 Start information object address 1-65535 UINT16 R/W
+2 Number of elements in the range 1-128 UINT16 R/W
49524-49526 Object address range #1
49527-49529 Object address range #2
… …
49617-46619 Object address range #32
IEC 60870-5 Assignable Point Map and Events Setup
49716-49971 UINT16 R/W
+0 Point ID See Section 3.4 UINT16 R/W
+1 Information object type and flags Bits 0:7 – static object type
identification (F3, F5, F7),
Bits 8:9 – relation (0=delta, 1=
more than, 2 = less than)
Bit 10=1 – class 1 assignment UINT16 R/W
+2,3 Deadband/threshold See Section 3.4 for the point range
and resolution
INT32 R/W
49716-49719 Mapped static/event point #1
49720-49723 Mapped static/event point #2
… …
49968-49971 Mapped static/event point #64
DNP Options Setup
51158-51183
+0 Default Binary Input Static object variation F24 (default 0) UINT16 R/W
+1 Reserved UINT16 R/W
+2 Default Binary Counter object variation F24 (default 3) UINT16 R/W
+3 Default Frozen Binary Counter object variation F3 (default 4) UINT16 R/W
+4-5 Reserved UINT16 R/W
+6 Default Analog Input object variation F24 (default 3) UINT16 R/W
+7-10 Reserved UINT16 R/W
+11 16-bit BC scaling
0=
×
1 (default), 1=
×
10, 2=
×
100,
3= × 1000
UINT16 R/W
+12 16-bit AI scaling 0=scaling is OFF, 1=scaling is ON UINT16 R/W
+13-5 Reserved UINT16 R/W
+16 Select/Operate Timeout 2 to 30 seconds (default 10 sec) UINT16 R/W
+17 Multi Fragment Interval 5 to 500 ms (default 10 ms) UINT16 R/W
+18-21 Reserved Read as 65535 UINT16 R/W
Provided
by
Northeast
Power
Systems,
Inc.
www.nepsi.com