SATA Vision 2000, Operating Instructions Manual, Page: 140 / 570

140
EN
Operating Instructions SATA vision 2000
Variant 2 [2]
■ Belt unit with air control valve (figure with optional air warmer [2-12]
and optional air humidifier [2-4] )
Variant 3
[3]
■ Belt unit with T-piece air control valve [3-7] (figure with optional air
warmer [3-14] and optional air humidifier [3-4] )
5. Scope of Delivery
Variant 1
■ SATA vision 2000 breathing protection hood with attached air hose,
connection nipple and visor foil, sweat band and hood cover
■ Belt unit with attached activated charcoal absorber, air control valve ac-
tivated charcoal absorber for breathing air and volumetric flow indicator
■ 5 visor foils for carrier frame (supplied loose)
■ Operating Instructions
Variant 2
■ SATA vision 2000 breathing protection hood with attached air hose,
connection nipple and visor foil, sweat band and hood cover
■ Belt unit with air control valve
■ 5 visor foils for carrier frame (supplied loose)
■ Operating Instructions
Variant 3
■ SATA vision 2000 breathing protection hood with attached air hose,
connection nipple and visor foil, sweat band and hood cover
■ Belt unit with T-piece and air control valve
■ 5 visor foils for carrier frame (supplied loose)
■ Operating Instructions
After unpacking, check:
■ Breathing protection hood damaged
■ Complete scope of supply
6. Technical Design
6.1. Variant 1
[1-1]
Replaceable visor foil
[1-2]
Acoustic warning device
for minimum flow rate (not
visible)
[1-3] Breathing air tube
[1-4]
SATA top air humidifier
(optional)
[1-5] Gun compressed air hose
[1-6] Air connection for gun
compressed air hose