SATA SATAjet X 5500, Operating Instructions Manual

Page: 469 / 498

469
US
Operating Instructions SATAjet X 5500 RP/HVLP (DIGITAL) Operating Instructions SATAjet X 5500 RP/HVLP (DIGITAL)
3. Scope of Delivery
• Spray gun with nozzle set and
gravity flow cup
• Operating Instructions
• Tool kit
• CCS clips
Alternative versions with:
• Swivel joint
• Gravity flow cups made of PVC or
aluminum with different capacities
• Electronic pressure gauge
4. Design of the Spray Gun [1]
[1-1] Spray gun handle
[1-2] Trigger
[1-3]
Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[1-4] Spray gun connection with
QCC
[1-5]
Gravity flow cup connection
with QCC
[1-6] Paint strainer (not visible)
[1-7] Gravity flow cup
[1-8] Gravity flow cup lid
[1-9]
Anti-drip device
[1-10] Round/flat fan control
[1-11] Material flow control screw
[1-12] Material flow control counter
nut
[1-13] Air micrometer (air flow
control)
[1-14] Air micrometer (air flow con -
trol) locking screw
[1-15]
Air piston (not visible)
[1-16] Compressed air connection
[1-17] ColorCode-System (CCS)
[1-18] Front cover plate of the
pressure display (only with
DIGITAL)
[1-19] Pressure display (only with
DIGITAL)
5. Intended Use
The spray gun has been designed for the application of paints, lacquers
and other sprayable media by means of compressed air on suitable sub-
strates and surfaces.
6. Safety Instructions
6.1. General Safety Instructions
Danger! Notice!
• Before using the spray gun, please read all safety and the operating
instructions carefully. Safety instructions and indicated safety mea-
sures are mandatory.