SATA SATAjet 100 B F RP, Operating Instructions Manual

Page: 573 / 584

573
US
Approval for HVLP mandated areas Approval for HVLP mandated areas
Approval for HVLP mandated areas for SATAjet
®
spray
guns in RP technology (please refer to chart below)
SATA spray gun types as listed in the chart below are approved for sales
in the HVLP mandated areas within the USA listed on the SATA website
www.sata.com/usaapprovals and are subject to the following conditions.
■ The approvals are only valid for the spray guns listed in the chart below
under the supposition that the air pressure supplied to the spray guns
shall not exceed the maximum inlet pressure listed in the chart.
■ A SATA air micrometer with gauge 0/845, product number 27771, with
color coded reading screen showing max. 29 psi with blue coding or
a SATA adam 2 (additional digital air micrometer), Art. No. 160853
(for SATAjet 4000 B) or Art. No. 211557 (for SATAjet 5000 B), shall be
attached to the
standard spray guns listed in the chart below
other
than DIGITAL spray guns (see also chart below) and be in good work-
ing condition during spraying.
Spray gun type Max.
inlet
pressure
Additional measurement acces-
sory required
SATAjet 3000 B RP 35 psi [1],[2],[3],[4]
[1]
Micrometer with
gauge
[2]
SATA adam (no
longer available)
[3]
SATA adam 2
SATA adam 2 mini
[4]
SATA adam 2 U
SATAjet 3000 B RP
DIGITAL
35 psi ‒
SATAjet 4000 B RP 32 psi [1],[2],[3],[4]
SATAjet 4000 B RP
DIGITAL
32 psi ‒
SATAjet 5000 B RP 29 psi [1],[2],[3],[4]
SATAjet 5000 B RP
DIGITAL
29 psi ‒
SATAminijet 4400 B RP 35 psi [1],[2],[3],[4]
SATAjet 100 B RP 32 psi [1],[2],[3],[4]
SATAjet 100 B P 32 psi [1],[2],[3],[4]
SATAjet 1000 B RP 32 psi [1],[2],[3],[4]
Please see www.sata.com/usaapprovals for details!
[US]
Approvals | US-english