Sase PDG 8000P, Manual

Page: 71 / 73

o
Always install propane cylinders onto machinery in a well-ventilated area with no source of ignition within 10 ft
(3 m).
o
Use only UL, CTC/ DOT listed cylinders, like the EnviroGard Safe-Fill cylinder.
o
Never leave the machine running unattended.
o
Operate in a well-ventilated area.
o
If you smell gas:
o
Do not operate appliances, telephones, or cell phones. Do not turn lights or flashlights on or off. Flames
or sparks from these sources can trigger a fire or explosion.
o
Evacuate the area immediately.
o
Shut off the gas if it is safe to do so.
o
Report the leak from a safe location.
o
Do not return to the building until you are told it is safe to do so.
Emissions Awareness
o
Carbon Monoxide (CO) poisoning can be caused by excessive exhaust emissions. The symptoms include
headache, dizziness and nausea. Causes include:
o
Engines with poor preventative maintenance practices, usually those with dirty air filters.
o
Machines operated in confined areas without adequate ventilation.
o
Substandard machines with no emissions control technology and improperly set carburetion.
o
CO is an invisible, odorless, colorless gas.
o
CO can be lethal within as little as 30 minutes exposure at 3,000 part per million (ppm).
o
The Canadian Gas Association (CGA) has set a limit of 1,500 ppm CO in exhaust flow.
o
The Occupational Safety and Health Administration (OSHA) has established a limit of 35 ppm CO for an 8-hour
time weighted average in ambient air and is considering a limit of 800 ppm CO in exhaust flow.
PPM Risk
9 CO Max prolonged exposure (ASHRAW standard)
35
CO Max exposure for 8 hour work day (OSHA
standard)
800 CO Death within 2 to 3 hours
1,500 CO limit in exhaust flow per CSA standard (Canada)
12,800 CO Death within 1 to 3 minutes