Operating Instructions Cubis
®
MCE
29
Installation
t
Unscrew below-balance cap (1) at the device base with a suitable
screwdriver.
t
NOTICE
Damage to the device from cross-threading! Ensure that the
hook for below-balance weighing is inserted straight into the thread (1).
t
Install a draft protection shield.
t
Suspend the sample on the hook for below-balance weighing, e.g. with
a wire.
t
To cover the below-balance weighing equipment after weighing:
t
Remove the hook from the thread in the device base.
t
Screw in the below-balance cap with a suitable screwdriver to the
device base.
5.6 Positioning the Weighing Pan and
Associated Components
Install Device with a Rectangular Weighing Pan
Procedure
t
Place the weighing pan on the weighing module.
1
1
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...
