Cubis
®
MCA Operating Instructions
71
Decommissioning
11 Decommissioning
11.1 Decommissioning the Device
Procedure
t
Turn the device off .
t
Disconnect the device from the power supply .
t
Disconnect the device from all connected devices and all accessories, e .g . printer .
t
Clean the device (see Chapter 9 .2, page 67) .
t
If below-balance weighing has been set up:
t
Remove the hook for below-balance weighing from the thread (1) .
t
Insert the hook for below-balance weighing back into its retainer on the
underside of the weighing module .
t
Re-insert the cover (2) of the below-balance weighing equipment .
12 Transport
12.1 Transporting the Device
Procedure
t
Only lift the device by its base .
t
When lifting and transporting, ensure that
no
personnel or objects are in
the way .
t
Get help from additional persons when lifting and transporting the device .
t
Use suitable conveyance devices, e .g . trolleys, for long transport routes .
2
1
Summary of Contents for Cubis MCA10202S Series
Page 2: ......
Page 85: ...Cubis MCA Operating Instructions 85 Conformity Documents...
