60 Cubis
®
MCA Operating Instructions
Operation
t
If an individual application from the displayed QAPP package is to be activated:
t
Press the desired application .
y
A display opens containing details about the selected application .
t
Press the [License] button .
y
The input field for the license key appears .
t
If an additional cost is associated with the application: Enter the license key
in the entry field and press the [OK] button .
t
If no additional cost is associated with the application: Press the [OK] button .
8.4.2 Adding an Application to a Task
Applications must be added to a task so that they can run .
Procedure
t
Open Task Management .
t
Press the [New] button .
y
A list of all activated applications is displayed .
t
To select an application: Press the desired application .
y
The wizard for creating a new task starts .
t
Follow the wizard’s instructions in the operating display .
8.5 Adding Weighing and Print Profiles to a Task
To be able to use a weighing or print profile: Add a weighing or print profile to a
task . Weighing and print profiles can be configured in the Settings menu .
Procedure
t
Open the task .
t
Create or edit a task .
8.6 Preparing Weighings
The device must be prepared before every weighing .
Procedure
t
Level the device .
t
Zero the device . In order to do so, press the [Zero] button .
t
If the device
cannot
be zeroed: Remove the sample to be weighed and re-zero
the device .
t
Calibrate the device .
Summary of Contents for Cubis MCA10202S Series
Page 2: ......
Page 85: ...Cubis MCA Operating Instructions 85 Conformity Documents...
