Sartorius Cubis MCA10202S Series, Operating Instructions Manual

Page: 57 / 89

Cubis
®
MCA Operating Instructions 57
System Settings
7.5.21 Parameters in the “Device Settings / Display Properties” Menu
Parameter Settings Explanation
Display brightness Bright Sets the lighting intensity on the operating display to “bright” .
Medium Sets the lighting intensity on the operating display to “medium” .
ECO mode* Activates eco mode . For longer periods of downtime, the operating display
darkens automatically .
On/off switch Standby mode* The [Standby] button switches the device into standby mode . The device
can be reactivated by pressing the [Standby] button .
Off The [Standby] button switches the device off . The device must be
reactivated by pressing the ON key .
Color scheme Sartorius Standard* If the QAPP extension has been activated: Selects the color scheme for the
“Sartorius Standard” operating display . Additional color schemes can be
unlocked via the QAPP center .
* Factory setting
7.5.22 Parameters in the “Device Settings / Sound (Loudspeaker)” Menu
Parameter Settings Explanation
Touch sounds Activated Deactivates the acoustic signal for touch and keypad operation .
Deactivated* Activates the acoustic signal for touch and keypad operation .
Message sounds Activated Deactivates the acoustic signal for messages .
Deactivated* Activates the acoustic signal for messages .
Sound for end-of-
action Activated Deactivates the acoustic signal for the completion of an action .
Deactivated* Activates the acoustic signal for the completion of an action .
* Factory setting
7.5.23 Parameters in the “Device Maintenance” Menu
Parameter Settings Explanation
Update firmware Starts a firmware update .
Not
for conformity-assessed devices .
Update QAPP Center USB stick Updates the QAPP center using the connected USB stick .
Update customized
QAPP USB stick Updates the customized QAPP using the connected USB stick .
Backup device settings USB stick Saves the device data on a connected USB stick .
Restore device settings USB stick Loads the device data from a connected USB stick .
Export device data Role management Saves device role management for an administrator, user, or guest on a
connected USB stick .
User management
Saves device user management for an administrator, user, or guest on a
connected USB stick .
Import device data USB stick Loads the device data from a connected USB stick .
Restore factory settings Resets the device to factory settings and deletes all configurations . The
audit trail and data memory will be retained .
Create diagnostic file
Saves information about device configuration and operation on a
connected USB stick .