40 Cubis
®
MCA Operating Instructions
Getting Started
6 Getting Started
6.1 Installing the AC Adapter
Procedure
t
NOTICE
Improper connection may damage the device! If the device is connected
using electronic components, e .g . printer, PC: The device must be disconnected
from the power supply . Ensure that the device is disconnected from the power
supply .
t
Connect the device using electronic components (see electronic components
instructions) .
Procedure
t
Plug the DC supply cable of the AC adapter into the device’s “power supply”
connection socket and tighten the threaded fitting .
t
Connect the power supply cable to the AC adapter connection .
6.2 Connecting the Power Supply
Procedure
t
WARNING
Severe injuries caused by using a defective power supply cable!
Check the power supply cable for damage, e .g ., cracks in the insulation .
t
If required: Contact Sartorius Service .
t
Check whether the country-specific power plug matches the power connections
at the installation site .
t
If required: Contact Sartorius Service .
t
NOTICE
Damage to the device due to excessive input voltage! Check whether the
voltage specifications on the AC adapter match those of the power supply at the
installation site .
t
If the input voltage is too high: Do
not
connect the device to the power
supply .
t
Contact Sartorius Service .
t
Connect the mains plug of the power supply cable to the wall outlet at the
installation site .
y
The [Booting device . . .] display appears in the operating display .
y
The [Starting system . . .] display appears in the operating display .
y
The [Starting application . . .] display appears in the operating display .
y
The [Loading] display appears in the operating display .
y
The device performs an initial tare function .
Summary of Contents for Cubis MCA10202S Series
Page 2: ......
Page 85: ...Cubis MCA Operating Instructions 85 Conformity Documents...
