Cubis
®
MCA Operating Instructions
39
Installation
5.7 Positioning the Weighing Pan and Associated Components
Procedure
t
Place the pan support down on the retainer, diagonally to the weighing module,
and apply gentle pressure .
t
Carefully turn the pan support clockwise until the two buttons engage .
y
The pan support is now attached .
t
Place the shield ring (2) on the weighing module (3) .
t
Place the weighing pan (1) on the pan support .
5.8 Acclimatization
When a cold device is brought into a warmer area: The temperature difference can
lead to condensation of humidity in the device (moisture formation) . Moisture in
the device can lead to malfunctions .
t
Allow the device to acclimatize for approx . 2 hours at the installation site .
Ensure that the device is disconnected from the power supply during that time .
1
2
3
Summary of Contents for Cubis MCA10202S Series
Page 2: ......
Page 85: ...Cubis MCA Operating Instructions 85 Conformity Documents...
