Appendix 43
The following table lists all logs and their content which the device outputs:
Log
Content
Weld log
The weld log is always output in the language that is currently chosen .
The weld log is a table with the following columns:
Date (dd .mm .yyyy)
Time (hh:mm:ss)
User (Name of the user who performed the welding)
Tube type (for example: C-Flex 374)
Tube description (for example: OD 1in / ID 3/4in)
Tube holder identification
Cycle (A counter that is incremented after every welding .)
Depyrogenation temperature
Welding temperature
Welding time (Cutting in to the tubes – tubes are pressed together)
Process time (Pressing start – Fan starting)
Event (Important event during the welding such as abort by user,
blocked condition, etc .)
Raw log
Please always send this file with a problem report/complaint .
Status
Please always send this file with a problem report/complaint .
9.8 Tube holder identification
The following list shows all currently supported tube holder identifications and their
tube geometries .
Tube holder
identification |
color code
Tube geometry
Inside diameter
Outside diameter
[mm]
[inches]
[mm]
[inches]
1 blue
19 .0
3/4
25 .4
1
2 green
15 .9
5/8
22 .2
7/8
3 grey
12 .7
1/2
19 .0
3/4
4 white
9 .5
3/8
15 .9
5/8
12 red
6 .4
1/4
11 .1
7/16
9 orange
6 .4
1/4
9 .5
3/8
11 yellow
3 .2
1/8
6 .4
1/4