12 13
14 15
40
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Flag Mount Installation - Round SlimLine/Aluminum Clock
1
2
12)
Remove the gearbox pin
, then attach
the patch cable to the port on the right side of
the movement. If the clock is able to access the
Internet, it will begin to correct itself. Make a note
of the clock’s Serial Number, which should be on a
white sticker above the port. Add this information
to your tracking chart.
13) Lay any excess wiring across the strain relief
base, then attach the strain relief to the clock with
the two #6-19x7/16 screws. The strain relief should
be tight enough to prevent the wire from sliding.
14) Slide the clock onto the adapter in the rotation
that you wish it to be viewed. You should hear a
snapping noise as the four clips on the adapter
secure the clock in place.
15) If you feel the need to detach the clock from the
housing after the installation has been completed,
use a flat-blade screwdriver on the four slots
around the outside of the housing. You may hear a
snapping noise as the internal latches disengage.
WALL
CEILING