9
11
10
12
28
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Square Clock
11) Slide the clock back into the housing. You
should hear a snapping noise as the
latches reengage.
10) Loosen the strain relief by unscrewing the two
screws. Slip any excess wiring through it, then
tighten the strain relief by reinserting and tightening
the screws.
12) If you feel the need to take the clock off the
wall after the installation has been completed, use
a flat-blade screwdriver to detach the housing from
the back of the clock, then use a Phillip’s-head
screwdriver to detach the mounting piece from the
housing and gang box.
1
2
9)
Remove the gearbox pin
, then attach the
patch cable to the port on the right side of the
movement. If the clock is able to access the Internet,
it will begin to correct itself. Make a note of the
clock’s Serial Number, which should be on a white
sticker above the port. Add this information to your
tracking chart.