5 6
8
7
15
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round Metal Clock
5) Insert the wall anchor into the hole, then reattach
the mounting bracket. This time, also insert the
#10x1.5 screw through the top of the mounting
piece and into the wall anchor.
8) Use the two M4-0.5x10 screws to attach the
clock to the mounting bracket. The screws should
pass through the top and bottom holes on the
clock, followed by the top and bottom holes of the
mounting bracket.
7) Attach the clock to the mounting piece so that
the hole at the top of the clock lines up with the
hole at the top of the mounting piece, and the hole
at the bottom of the clock lines up with the hole at
the bottom of the mounting piece.
1
2
6)
Remove the gearbox pin
, then attach the
patch cable to the port on the right side of the
movement. If the clock is able to access the Internet,
it will begin to correct itself. Make a note of the
clock’s Serial Number, which should be on a white
sticker above the port. Add this information to your
tracking chart.