Sanyo Zio, User Manual

Page: 150 / 163

136 4A. Important Safety Information
The highest reported SAR values of the Zio
TM
are:
Cellular CDMA mode (Part 22)
:
Head: 1.09 W/kg; Body-worn: 0.52 W/kg
PCS mode (Part 24) :
Head: 1.41 W/kg; Body-worn: 0.47 W/kg
FCC Radio Frequency Emission
This device meets the FCC Radio Frequency Emission
Guidelines.
FCC ID number: V65SCP-8600.
More information on the device’s SAR can be found from the
following FCC website:
http://www.fcc.gov/oet/ea/
.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
䢇
Reorient the direction of the internal antenna.
䢇 Increase the separation between the equipment and
receiver.
䢇 Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
䢇 Consult the dealer or an experienced radio/TV technician for
help.
Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.