Sanyo Xacti VPC-CA100EX, Manual For Basic Operation

Page: 46 / 91

21
English
3
Set the clock.
1
Select “TIME”.
2
Press the SET button.
h
The Set Time Screen
appears.
3
Set the time to “19:30”.
h
The time is set in the
following order: Set the hour
→
Set the minute.
h
A 24-hour clock is used for
the time display.
4
Press the SET button.
4
Set the order in which the date is
displayed during playback.
1 Select “DISP”.
2 Press the SET button.
h
The Set Date Format Screen
appears.
3 Press [
I
] or [
J
].
h
The date display order
changes.
4 Press the SET button.
5
Press the MENU button.
h
The date and time setting is completed.
h
To display the Recording or Playback Screen, press the MENU button.
HINT
i
Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost (the backup will last for about
7 days). It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow step
1 ).
To correct the date and time settings
1 Turn on the camera.
2 Display the Option Setting Menu 1 (page 26).
3 Select “CLOCK SET” and press the SET button.
h
The screen to set the date and time appears.
h
The current date and time settings are shown.
4 Select the line you wish to change, and make the correction.
19:30 TIME
CLOCK SET
OK
CLOCK SET
OK
DISP D / M / Y