background image

INSTRUCTION MANUAL

Color Video Monitor

VMC-8618
VMC-8620

CONTENTS

INFORMATION TO USER . . . . . . . . . . . . . . . . . . . . . .  1

PRECAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

ADJUST THE OSD MENU ITEM . . . . . . . . . . . . . . . . .  7

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . .  9

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

FEATURES

Equipped with video and audio input terminals

The video and audio input terminals (two systems for
each input) allow bridge connections.

Equipped with Y/C input (S-VIDEO input) terminal

This terminal is used to input Y/C separation signals
(S-VIDEO signals).

Eight languages OSD MENU

ENGLISH, FRANCAIS, DEUTSCH, ESPAÑOL,
ITALIANO, RUSSIAN, CHINESE, JAPANESE

Horizontal resolution

More than 800 TV lines (VMC-8618)
More than 450 TV lines (VMC-8620)

PAL/NTSC color system, selected automatically

Built-in speaker

Multi voltage (100 – 240 V)

ACCESSORY

AC power cord (Re-attachable)

About this manual

Before installing and using this unit, please read this
manual carefully. Be sure to keep it handy for later
reference.

This manual gives basic connections and operating
instructions for 2 models.

L8MV5/US--2, L8MZ5/US--2 (VMC-8618, 8620 GB) 2003. 5. 28

Summary of Contents for VMC-8618













Reviews: