Sanyo VCC-6592P Instruction Manual Download Page 1

Page: 1 / 22

INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS

VCC-6592P

VCC-6594P

COLOUR CCD camera

CCD-Farbkamera

Caméra CCD COULEUR

CCD

About this manual

• Before installing and using the camera, please read this manual

carefully. Be sure to keep it handy for later reference.

• This manual gives basic connections and operating instructions for 2

PAL models (VCC-6592P, 6594P).

Über diese Bedienungsanleitung

• Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der Kamera

zuerst diese Bedienungsanleitung sorgfältig durch und bewahren Sie
sie zum späteren Nachschlagen auf.

• In dieser Anleitung finden Sie die Anschlüsse und die Grundbedienung

für 2 PAL-Modelle (VCC-6592P und 6594P)

A propos de ce manuel

• Avant d’installer et d’utiliser la caméra, veuillez lire ce manuel

attentivement. Gardez-le à portée de main pour toute référence
ultérieure.

• Ce manuel couvre les branchements et instructions pour l’utilisation

de base pour 2 modèles de format PAL (VCC-6592P et 6594P).

PAL

VCC-6592P, 6594P

L53H2, H4/XE GB 2001, 9, 18

Summary of Contents for VCC-6592P























Search results

Summary of Contents for VCC-6592P

Reviews:

Related manuals for VCC-6592P

Brands by name

Popular brands

Sanyo VCC-6592P, Instruction Manual

Search results

Summary of Contents for VCC-6592P

Reviews:

Related manuals for VCC-6592P

Brands by name

Popular brands