Camera Setup 11
Charging the Battery
Eng
lish
Charging the Battery
1. Insert the battery into the camera and connect the USB/AV
3-in-1 cable with the power adapter as shown in the picture.
2. Connect the power adapter to a live household outlet to start
charging. The power LED will blink during the charging process.
3. Disconnect the USB/AV 3-in-1 cable when the charging is done.
When the charging is done, Power LED still turns on.
Charging the Battery with USB power
1. Turn the power off and connect the USB/AV 3-in-1 cable with the camera and the computer.
2. The power LED will blink during the charging process.
3. The Power LED will keep steady blue when charging is done.
4. Disconnect the USB/AV 3-in-1 cable.
Turning On
Press and hold the POWER button to turn on the camera. To turn off the camera, press the POWER
button again.
Note:
1. The room temperature suitable for charging the camera is 6°C ~ 36°C. Power LED blinks during the
charge and keep steady blue automatically after the charge.
2. The battery will not be charged when the room temperature is above 36°C or below 6°C. Also,
Power LED will not blink. The battery will be continually charged till the temperature is between
6°C ~ 36°C.
3. All Modes are disable when charging the camera. If power on the camera, LCD will show "Turn Off
when charging".
8.0
M
EG
A P
IX
ELS
1
2
.0
M
E
G
A
